OPERATO FIGURE · BUILD YOUR DIGITAL WORLD

One equipment model.
More possibilities.

A digital twin needs more than a good-looking shape.
Equipment must adapt to each site and communicate its state.
Figure keeps assembly and resizing rules with the model, reducing the work of rebuilding the same equipment.

See what changes—and what stays the same.Conveyor
Drag to explore from another angle
3,000 mm

Preparing the scene.

Change the conveyor length, or the width and height of the workbench and rack. The readout shows which dimensions each model preserves.

WHY WE BUILT FIGURE

Not just another 3D modeler.
Create reusable equipment for digital twins.

The problem we set out to solve went beyond drawing one convincing conveyor. It was placing conveyors of different lengths and widths across a site, then using them again at the next site. Copying a finished shape alone does not resolve longer frames, extra rollers or supports that need to move.

We needed a model that records what grows, what stays fixed and which parts stay attached. Keep resizing rules, part relationships, motion and state presentation with the equipment. Make it an asset that others can reuse across sites. We built Figure to make this a core part of creating a digital twin.

Reuse the rules you authored, instead of adjusting every part again.

01 / LESS REWORK

Less rework at each size.

Linked dimensions and attachments follow the change, reducing the need to resize and reposition parts individually.

02 / SHARED KNOW-HOW

Keep the author’s know-how.

The next author need not rediscover fixed thicknesses, repeat spacing or part relationships. Those rules travel with the model.

03 / THE NEXT SITE

Reduce model preparation for the next site.

Adapt equipment already in your library instead of starting over for each project. One authoring effort becomes an asset used across sites.

01 / A DIFFERENT WAY TO BUILD

A new site.
The same modeling work again?

A short transfer line and a long one. A bench for one operator and a bench for two. When modeling a site, you often encounter the same construction in different sizes. Copying a model still leaves the work of adjusting its individual parts.

In Figure, define how dimensions should change as you create the equipment. Reuse that model at another size when you need the same construction. Your next project can begin with an equipment library instead of an empty canvas.

01

Author the equipment

Assemble parts and set resizing rules

02

Adapt each placement

Long runs, short runs, different sites

03

Reuse on the next project

Open a saved model and adapt its dimensions

02 / CHANGE THE SIZE, KEEP THE INTENT

Longer. Wider.
Not stretched in every detail.

Stretching an entire 3D object is not the same as changing a machine’s specification. Its frame should grow, while its rollers keep their diameter. Maintaining the spacing means adding rollers, and parts near the ends need to follow those ends.

Figure distinguishes dimensions that follow the equipment size, dimensions that stay fixed and spacing for repeated parts. Parts respond according to the recorded relationships. Checking them across the intended size range reduces repeated adjustments later.

The frame follows the length

Link the frame length to the equipment length so the structure grows with the installation.

Roller diameter stays the same

A longer conveyor does not need thicker rollers. Dimensions that should remain fixed stay separate.

Add rollers to fill the length

Set the spacing for rollers or treads instead of copying and positioning every part by hand.

Try changing the conveyor length above ↑
03 / PARTS THAT BELONG TOGETHER

A wider workbench.
Not a thicker worktop.

Change the workbench width from 1.2m to 2.4m. The top gets wider but remains 40mm thick. The four legs move with the edges, while the drawer and handle keep their original dimensions.

As an assembly grows, the relationships between parts matter more than isolated coordinates. In Figure, a part can follow another part’s dimension or attach to its surface. Keeping those relationships in the model reduces the work of calculating and moving each part separately.

Single station
Single station1,200 × 900 mm
Wider station
Wider station2,400 × 900 mm
Workbench width→Worktop follows the width→Legs follow the edges
04 / DIFFERENT EQUIPMENT, DIFFERENT RULES

Different equipment.
Different rules for resizing.

A longer conveyor needs more rollers. A wider workbench still has four legs. A taller rack can use more space between its shelves. Applying one uniform scaling rule to all three would miss what each piece of equipment needs.

Compare the three examples by changing their dimensions. The rack retains four shelves and the post thickness while adjusting width and vertical spacing. The model’s author decides which dimensions to preserve and how parts should be arranged.

Low rack
Low rack1,400 × 1,400 mm
Tall rack
Tall rack1,400 × 2,400 mm
STATE AT A GLANCE

Equipment status.
A familiar visual signal.

Just as a tower light helps people read equipment status on the floor, its digital counterpart can communicate status in a twin. Keep the equipment model and change the indicator.

Choose green, amber, red or off. Lengthen the pole without enlarging the lamps. This preview uses manual selection; in a connected site application, equipment data determines the displayed state.

FROM INTENT TO RELATIONSHIPS

Define the shape.
Then define what must survive change.

Combine attachments, dimensions, repetition and joints to build your own structure. Apply the relationships learned in the examples to other equipment. First choose the inputs, allowed ranges and relationships to preserve.

What changes?

Choose the values that vary: frame length, shelf height or door angle. Resizing and changing a pose are different operations.

What stays fixed?

Choose relationships to preserve: sensor size, distance from an end or roller spacing. Decide part placement and motion axis separately.

Does it still hold?

Once the initial result is right, vary sizes and controls within their allowed ranges. Check that the recorded relationships produce the intended result before using the model.

Learn the principles through small examples →
05 / START WITH WHAT YOU KNOW

Choose the parts.
Build the equipment you need.

Start with familiar parts such as rollers, supports and frames. Place them, set their dimensions and build up the equipment on screen.

1. Pick a useful starting point

Place a box or cylinder, or choose doors, rollers, supports and rails from the catalog. You do not need to draw every part from scratch.

2. Make it your equipment

Set dimensions, attach parts and choose materials. Arrange repeated parts into rows or grids, then refine the whole assembly.

3. Try it, then keep it

Try different dimensions and motion states. Save and release your model so your catalog becomes a starting point for future sites.

06 / YOUR INTENT, IN YOUR WORDS

You know what needs to change.
You should not have to know every property.

“Widen the workbench, but keep the top thickness and drawer size.” Describe what should change and what should stay fixed. AI proposes edits to the open model; review the result against those relationships.

An accepted edit does not establish that every requirement is met. Compare before and after, and check the relationships at other sizes. Edit unresolved parts directly or ask for another change.

TRY SAYING · EXAMPLE REQUEST
Set the workbench width to 1800 mm. Keep the top thickness and drawer size, and move the legs with the ends.
Your intentThe desired resultYour reviewRequirements, before and afterYour decisionApply and refine
How to review AI results →
07 / A LIBRARY THAT GROWS WITH YOU

Build your library.
Start the next site with more in hand.

Build conveyors and workstations for your first site. Adapt their dimensions on the next one, and add new equipment types to the catalog as you go. Your reusable library grows with your projects.

Keep drafts separate from released assets and retain their history. Review the construction and rendering cost as you prepare to move from one good-looking machine to a scene containing many.

What equipment
makes your site yours?

Create one machine, adapt its dimensions and use it again on the next site.